28712

Yeeeah... That's A problem

You just got paid and its time to get that new laptop youve been dreaming of. So you head off to the store, pick up your new (insert brand name here) laptop and bring it home to check out your spoils. Youre thrilled when everything works great, until you try to plug in your cellular internet PCMCIA card. Then you realize that the card wont fit! Whats to be done?

ExpressCard Muscling In

This is a scenario that is becoming more and more common as computer manufacturers roll out new laptops using the newer, faster ExpressCard standard. And along with the advent of this new technology comes the demise of the PCMCIA standard, which will become more and more rare. Although the ExpressCard offers significantly faster speeds and a more compact form, which will help to keep laptop design slim, the rapidity of the rollout has caught ExpressCard manufacturers struggling to keep up with demand as consumers seek ExpressCards to replace their existing PCMCIA cards. Perhaps the most prevalent issue is that while there are now ExpressCard versions of most PCMCIA cards, there are few, if any, viable alternatives for EVDO, EDGE, or GSM cellular internet PCMCIA cardbus cards.

EVDO wireless router

There are several potential solutions to this issue. The first would be to buy a specially designed stand-alone router with a cardbus slot specifically intended for a wireless internet card. This router takes the cellular signal from the aircard and converts it into a WiFi signal that can be picked up by a standard 802.11b/g wireless adapter. The 3G Phoebus is in this class of router.

ExpressCard to PCMCIA

Another solution is to use an ExpressCard to PCMCIA adapter. This adapter plugs into your available ExpressCard slot, and allows you to connect your wireless aircard (via an attached cable and receiver) to your laptop.

usb to Cardbus adapter

The best available solution for this problem is to use a usb to PCMCIA adapter. This adapter consists of a usb cable that is attached to an adapter that is designed to allow you to insert your cellular PCMCIA card. Simply plug the usb port into your computer and do a simple install to take advantage of wireless internet with your new ExpressCard laptop.

// posted by 58378 @ 10:23 AM 0 comments

The popularity of vinyl siding with new construction started approximately 20 years ago. Recently, there have been many scientific breakthroughs that made vinyl siding almost maintenance free. However, if your vinyl siding home was built more than 20 years ago, the vinyl installed at that time did not have the advantages of our technological era. The factory finish is most likely faded and looking run down. You know that replacing your vinyl siding would be too expensive. You are lucky!. There is another way to make your vinyl siding look like new again You can paint it! You can change to a different color and

You can regain the fresh, new home look

Before you do any painting over your vinyl siding, talk to a professional. This will give you an idea of what the cost would be to hire someone to do it for you.

If you decide to paint, you will lose the maintenance free quality of vinyl. You might need to paint every 10 years.

The secret to painting your vinyl siding lies in the procedure.

1. Start by cleaning all the dirt and mildew accumulated through the years. The siding can be cleaned by hand scrubbing or by power washing it. There are many cleaners available at your local hardware store. After cleaning it, it is important to rinse it thoroughly. If you skip this step, the paint will not adhere to the surface. 2. You are now ready to paint!

a. Vinyl siding has a very high coefficient of elasticity. This means that it expands or contracts depending on the temperature. This quality makes it challenging to paint.

b. In you want your new painted surface to last a long time, you will need to chose a high grade acrylic latex paint. This paint has extraordinary bonding capabilities. It will expand and contract with the vinyl without cracking.

c. A new color scheme can also be used. However, the new color must be lighter than the original color. Each vinyl siding is manufactured to resist specific levels of heat. If you chose a darker color, your new siding will absorb more heat. This could have some ugly consequences your siding might warp or buckle.

d. Try not to paint under the direct sunlight if possible. Overcast weather produces better results.

3. It is recommended that you apply two coats of paint. Two coats of paint will provide excellent adhesion and the flexibility needed on vinyl siding. It will also resist peeling and fading.

If you follow this procedure, your home will look like new again and your painting job will last approximately 10 years. In addition, you will have literally saved thousands of dollars avoiding a new vinyl siding job Enjoy!

Mr. Borjas started investing in Real Estate 7 years ago. This activity led to a General Contractors License and to build custom homes in NC.

// posted by 58378 @ 1:50 AM 0 comments